| 1 SN | High-pressure hose, DIN 20 022 (EN 853), part 3 corresp. to SAE 100 R1T, with one braid enforcement |
| 1~AC | 1-phase alternating current |
| 2 SN | High-pressure hose, DIN 20 022 (EN 853), part 4, corresp. to SAE 100 R2T, with two braid enforcements |
| 3~AC | 3-phase alternating current |
| 5AS | Automatic shutdown after run time of 5 minutes, press the ON/OFF switch twice to start a new pump cycle |
| °C | Degree Celsius |
| °F | Degree Fahrenheit |
| a | Outer / male |
| A | Ampere |
| ABGS | Discharge hose |
| ABK | Battery clips |
| ABM | Dimensions |
| ABS | Acrylonitrile butadiene styrene copolymer |
| AC | Alternating current |
| AD | Outside diameter, in millimetres |
| Ah | Ampere hour |
| ALNI | Aluminium nickel |
| Alu | Aluminium |
| AMS | Anti-drop coupler, manual shut-off |
| ASA | Automatic switch-off |
| B | Product size |
| BFS | Filling side (tank) |
| BM | Designed for floor mounting |
| BSF | British standard fine/Whitworth thread, quality: fine |
| BSP | British Standard Pipe |
| CDS | Code lock
|
| CDSP | PIN code lock
|
| CHS | Swiss plug |
| CSM | Hypalon® |
| DAZ | Digital display, access with code |
| dB (A) | Decibel, A-weighted noise level |
| DC | Direct current |
| DG | Swivel joint |
| DIN | Deutsches Institut für Normung (German Institute for Standardisation) (DIN standards) |
| DK | Sealing cone |
| DM | Designed for mounting on ceilings |
| DMS | Diesel Management System |
| DN | Inner diameter, in millimetres |
| DPP | Anschluss Abgabeleitung |
| DRST | Pressure control |
| E-CTFE | Ethylene chlortrifluorethyhlene (Halar®) |
| EAATM | Stainless steel discharge spout with anti-drip coupler |
| EAN-Code | European Article Number Code (bar code) |
| EBZDU | In-line meter, digital, for urea (AdBlue®) |
| EBZM | In-line meter, mechanical |
| EF | Calibratable |
| EMP | Electric diaphragm pump |
| EN | European standard |
| EPDM | Ethylene propylene diene rubber |
| EST | Interference suppression |
| EUS | Euro plug |
| F | Filter |
| FCKW | Fluorinated hydrocarbons |
| FEP | Tetrafluorethylene perfluorpropylene (Teflon® FEP) |
| FKM | Viton® |
| FMS | Fluid Management System |
| FPM | Fluoropolymer (Viton®) |
| FSM | Fill level - Fill volume unit of measure |
| FSMG 1.04 | Fill level monitoring device |
| ft | Foot (measure of length) |
| FUV | Foot valve |
| FZP | Vane pump |
| G | Whitworth Pipe Thread, cylindrical, ISO 228 (DIN 259) |
| gal. | gallon |
| GBS | UK plug |
| GDA | Encased, swivel joint, outside |
| GG | Gray cast iron |
| GLN | Global location number |
| gpm | Gallons per minute |
| GPM | Assembled on mounting plate |
| GS | Tested for safety |
| GTIN | Global Trade Item Number |
| HD | High pressure |
| HDPE | High density polyethylene |
| HNBR | Hydrogenated acrylonitrile butadiene rubber |
| Hyrtel® | Hyrtel® is a registered trademark of the Du Pont company |
| Hz | Hertz |
| i | Inside / female |
| IBC | Intermediate Bulk Container (for transport and storage of liquids and pourable matters) |
| ID | Inner diameter |
| IKV | Available soon |
| ILN | International location number |
| INOX | Stainless steel |
| IP | Protection class |
| IPG | Pulse generator |
| ISO VG | International Organization for Standardization; standard relating to degree of viscosity |
| kg | Kilogram |
| kW | Kilowatt |
| l/min | Liters per minute |
| lb | Pound |
| LBH | Length x width x height, in millimetres |
| LDPE | Low density polyethylene |
| LLDPE | Linear low density polyethylene |
| LW | Clear width |
| m | Meter |
| M | Metric thread, cylindrical, DIN 13 |
| M-Ein Aus | Manual on/off control by switch |
| MBP | Diaphragm pump |
| MDPE | Medium density polyethylene |
| Me | Brass |
| mm | Millimeter |
| MoS2 | Molybdenum disulfide |
| mPas | Millipascal per second |
| NBR | Nitrile butadiene caoutchouc (Perbunan® Buna-N®) |
| ND | Nominal pressure |
| NEF | Non-calibratable |
| NEOP | Neoprene |
| NW | Nominal width = inside diameter |
| O | Open |
| Ø | Diameter |
| ÖMS | Oil management system |
| PA | Polyamide |
| PC | Polycarbonate |
| PE | Polyethylene |
| PEI | Polyetherimide |
| PFA | Perfluoralkoxy (Teflon® PFA) |
| PMP | Polymethylpentene (TPX®) |
| PN | Nominal pressure or operating pressure |
| POM | Acetal homopolymer |
| PP | Polypropylene |
| PPGF | Polypropylene, glass fiber reinforced |
| PPS | Polyphenylene sulfide |
| PS | Polystyrol |
| PSF | Polysulfone |
| psi | Pound-force per square inch |
| PTB | Phyiscal Technical Institute of Germany |
| PTFE | Polytetrafluorethylene (Teflon®) |
| PVC | Polyvinyle chloride |
| PVC-U | Polyvinylchlorid-unplasticized |
| PVDF | Polyvinylidene fluoride |
| R | Whitworth thread, tapered, similar to DIN 3858, self-sealing connection |
| red | Reduction |
| RST | High-quality steel |
| S | Buttress thread |
| SAN | Styrene acrylonitrile |
| SFS | Floating fill level probe |
| SI | Silicone rubber |
| SRL | Suction pipe length, in mm |
| St | Steel |
| ST | Front side |
| SW | Width across flats |
| TP | Submersible pump |
| TRBF | Technical guideline for inflammable fluids |
| UL | Underwriters Laboratories Inc. |
| V | Volt |
| VA | Stainless steel |
| VSTB | Galvanized sheet steel |
| VZ | Galvanized |
| W | Watt |
| WAZ | Maintenance access |
| WB | Wall and floor mounting |
| WHG | Water Resources Act (Germany) |
| WML | Designed for left hand wall mounting |
| WMR | Designed for right hand wall mounting |
| ZDG | Die-cast zinc |
| ZVA | Automatic nozzle valve for diesel |
| ZVAB | Automatic nozzle valve for diesel with German type approval |
| ZVABD | Automatic nozzle valve for diesel with German type approval and swivel joint |
| ZVAD | Automatic nozzle valve for diesel with swivel joint |
| ZVAU | Automatic nozzle valve for urea (AdBlue®) |
| ZVAUD | Automatic nozzle valve for urea (AdBlue®) with swivel joint |
| ZVD | Manual nozzle valve, Al, with swivel joint |
| ZVH | Control gun storage rack |
| ZVMU | Mechanical nozzle valve for urea (AdBlue®) |
| ZVMUD | Mechanical nozzle valve for urea (AdBlue®) with swivel joint |
| ZVPP | Nozzle valve, polypropylene |
| ZVS | Nozzle valve switch |
